Rexroth Frequency Converter VFC 3210
3.3 Parameter List
3.3.1 Terminology and Abbreviation in Parameter List
Code: Function / parameter code, written in bx.xx, Cx.xx, Ex.xx, Ux.xx, dx.xx
●
Name: Parameter name
●
Default: Factory default
●
Min.: Minimum setting step
●
Attri.: Parameter attribute
●
– Run: Parameter setting can be modified when the converter is in run or
stop status.
– Stop: Parameter setting can only be modified when the converter is in stop
status.
– Read: Parameter setting is read-only and cannot be modified.
DOM: Depends on model
●
[bx.xx], [Cx.xx], [Ex.xx], [Ux.xx], [dx.xx]: Function / parameter values
●
3.3.2 Group b: System Parameters
b0: Basic system parameters
Code
Name
b0.00 Access authority setting
b0.10 Parameter initialization
b0.12 Parameter set selection
b0.20 User password
b0.21 Manufacturer password
Setting range
0: Basic parameters
1: Standard parameters
2: Advanced parameters
3: Start-up parameters
4: Modified parameters
0: Inactive
1: Restore to default settings
2: Clear error and warning re-
cord
0: Parameter set 1 active
1: Parameter set 2 active
0...65,535
0...65,535
R912007861_Edition 02 Bosch Rexroth AG
23/51
Start-up
Default
Min.
Attri.
0
–
Run
0
–
Stop
0
–
Stop
0
1
Run
0
1
Run