Receiving Rds Stations; Description Of Rds Data; Changing The Rds Mode - Yamaha RX-V530RDS Owner's Manual

RDS (Radio Data System) is a data transmission system by FM stations in many countries.
RDS data contains various information such as PS (Program Service name), PTY (Program Type), RT (Radio Text), CT
(Clock Time), EON (Enhanced Other Networks), etc. The RDS function is carried out among the network stations.

Description of RDS data

This unit can receive, PS, PTY, RT, CT, and EON data
when receiving RDS broadcasting stations.
I PS (Program Service name)
mode:
The name of the RDS station being received is displayed.
I PTY (Program Type) mode:
There are 15 program types to classify RDS stations.
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
M.O.R. M Middle-of-the-road music
LIGHT M
CLASSICS
OTHER M
I RT (Radio Text) mode:
Information about the program (such as the title of the
song, name of the singer, etc.) on the RDS station being
received is displayed by a maximum of 64 alphanumeric
characters, including the umlaut symbol. If other
characters are used for RT data, they are displayed with
under-bars.
I CT (Clock Time) mode:
The current time is displayed and updated every minute.
If the data are accidentally cut off, "CT WAIT" may
appear.
I EON (Enhanced Other Networks):
Refer to following page.
38

RECEIVING RDS STATIONS

News
Current affairs
General information
Sports
Education
Drama
Culture
Science
Light entertainment
Pops
Rock
(easy-listening)
Light classics
Serious classics
Other music

Changing the RDS mode

The four modes are available in this unit for displaying
RDS data. When an RDS station is being received, PS,
PTY, RT and/or CT mode indicators that correspond to
the RDS data services offered by the station light up on
the front panel display. Press RDS MODE/FREQ
repeatedly to change the display mode among the RDS
data offered by the transmitting station in the order shown
below.
RDS MODE/FREQ
E O N
Notes
• When an RDS station is being received, do not press RDS
MODE/FREQ until one or more RDS mode indicators light up
on the front panel display. If you press the button before the
indicators light up on the front panel display, the mode cannot
be changed. This is because this unit has not yet received all of
the RDS data on the station.
• RDS data not offered by the station cannot be selected.
• The RDS data service cannot be utilized by this unit if the
received signal is not strong enough. In particular, the RT mode
requires a large amount of data to be received, so it is possible
that the RT mode may not be displayed even if other RDS
modes (PS, PTY, etc.) are displayed.
• RDS data cannot sometimes be received under poor reception
conditions. If so, press TUNING MODE so that the "AUTO"
indicator goes off from the front panel display. Although the
reception mode is changed to monaural by this operation, when
you change the display to RDS mode, RDS data may be
displayed.
• If the signal strength is weakened by external interference
during the reception of an RDS station, the RDS data service
may be cut off suddenly and "...WAIT" will appear on the front
panel display.
PS mode
PTY mode
RT mode
CT mode
RDS mode
OFF