Running Another Program - HP -10C Owner's Handbook Manual

90 Section 8: Multiple Programs

Running Another Program

To run a program that does not begin with program line 01:
1. In Run mode, set the calculator to the first line of the program desired.
2. Press ¦.
Example: Run the temperature conversion program, now stored in the
calculator beginning at program line 15, for a 37.5°C water bath.
Keystrokes
t15
37.5¦
Display
96.26
Sets calculator to first line
of program to be
executed. (Run mode.)
Temperature of water in
degrees Fahrenheit.