Yamaha RX-N600 Owner's Manual page 83

CROSSOVER
Crossover
Use this feature to select a crossover frequency of all the
speakers set to "SML" (or "SMALL") or to "NONE" in
"SPEAKER SET" (see pages 77 and 78). All frequencies
below the selected frequency will be sent to the subwoofer
or to the speakers set to "LRG" (or "LARGE") in
"SPEAKER SET" (see pages 77 and 78).
Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz,
120Hz, 160Hz, 200Hz
CROSSOVER
FREQ;;;80Hz
Subwoofer phase SUBWOOFER PHASE
Use this feature to switch the phase of your subwoofer if
bass sounds are lacking or unclear.
Choices: NORMAL, REVERSE
02ASUBWOOFER PHASE
>NORMAL
• Select "NORMAL" if you do not want to reverse the
phase of your subwoofer.
• Select "REVERSE" to reverse the phase of your
subwoofer.
REVERSE
Speaker level
B)SPEAKER LEVEL
Use this feature to manually balance the speaker levels
between the front left or surround left speakers and each
speaker selected in "SPEAKER SET" (see page 77).
Control range: –10.0 to +10.0 dB
Control step: 1.0 dB
Initial setting: 0 dB
B)SPEAKER LEVEL
-__________+
.
FL;;;;;;;;;;
FR;;;;;;;;;;
C;;;;;;;;;;
• Select "FL" to adjust the balance of the front left
speaker.
• Select "FR" to adjust the balance of the front right
speaker.
• Select "C" to adjust the balance of the center speaker.
• Select "SL" to adjust the balance of the surround left
speaker.
• Select "SR" to adjust the balance of the surround right
speaker.
• Select "SB" to adjust the balance of the surround back
speaker.
• Select "SWFR" to adjust the balance of the subwoofer.
Note
"C", "SL", "SR", "SB" and "SWFR" cannot be adjusted if
"CENTER SP" (see page 78), "SUR. L/R SP" (see page 78),
"SUR. B SP" (see page 78) and "LFE/BASS OUT" (see page 78)
are set to "NONE" respectively.
SET MENU
79
En