Universal Security Instruments LITE AIDE HE-430N User Manual

IMPORTANT SAFEGUARDS
1. Servicing of this light should be performed by qualified
personnel only. The product contains no serviceable
parts. Refer to Warranty for detail
2. Do not use any other power adapter to charge the
battery
FEATURES
• Energy Efficient Ultra-Bright White LED emergency light
automatically turns on during power failure
• Photo sensor triggers the soft LED night light. Night light
automatically turns on at dark, turns off at dawn
• Built-in rechargeable battery included
• Lower power consumption—long battery life
• Long-life, 6 LED array, with two separate flood lights
• 48 Hours of Continuous Emergency Flood Lighting
• 80 Hours of Continuous Night Lighting
• Red LED confirms light is charging
INSTALLATION
1. Adjust the swivel lighting heads up
or down and left to right to direct
light where needed.
2. The lighting head rotation is
limited—Figure 1. Try not to
extend beyond the angle shown;
otherwise it may cause internal mechanical damage.
3. Mount the unit in desired area using the template
attached below. Wall anchors and screws are included
for your convenience. Figure 2.
4. Plug the power adaptor into an AC
outlet and the power adaptor plug
into the night light unit. The night
light unit must be plugged into an
AC outlet to charge the battery.
Allow at least 48-72 hours for
the internal 6VDC battery to fully
charge to it's rated capacity before
intitial operation. Figure 3.
NOTE: The red LED charge
indicator will stay lit when the unit
is plugged into the AC power outlet.
Figure 4.
HE-430N USER'S MANUAL
LITE AIDE® EMERGENCY FLOOD LIGHT
WITH AUTOMATIC NIGHT LIGHT
Thank you for purchasing this Emergency Spotlight & Automatic Night Light from
Universal Security Instruments. This manual includes important information regarding
operation, maintenance and testing. Be sure to read and follow all safety
instructions.
OPERATION
NOTE: The on/off switch controls the emergency light only
1. Set the emergency light switch to one of the following:
2 Lights, 1 Light, or Off
a. 2 Lights—Both lights come on when power fails
b. 1 Light—One light comes on when power fails
c. Off—Both lights are off
During an electrical power failure:
a. The lights will automatically come on and last for
approximately 48 hours when the switch is set at
2 Lights
b. The lights will automatically come on and last for
approximately 96 hours when the switch is set at
1 Light
2. Set the night light switch to one of the following:
ON—To manually switch night light on
OFF—To manually switch night light off
AUTO—Soft LED night light automatically turns on at
dark/dusk.
NOTE: Emergency light will provide 80 hours of
continuous lighting for night light
Soft LED night light automatically turns on at dark/dusk,
or when household lighting is off. Night light automatically
turns off at dawn, or when household lighting is on.
TESTING
1. Depress and hold the test button located on the front of
the product. The power adaptor must be plugged into
the light and the battery charged. One or two of the
lights should turn on. When the button is released, the
light(s) will turn off.
2. If the lights do not come on, try one or more of the
following:
a. U nplug and reconnect the power adaptor plug into
the light. The Red LED charging light should be on.
b. C onfirm the AC outlet has power.
c. Press and hold the test button longer.
To reduce the risk of injury, only charge the light
using the provided power adaptor.
Other types of power adaptors may cause
personal injury or damage.
Figure 2