Connecting The Rjp (Remote Jack Pack) - Samsung 460 Series Installation Manual

Output to any external source connected to RJP on the hotel desk.
TV Rear Panel
✎ Availability depends on the specific model.
1. Connect the PC IN /
2. Connect the AV IN [VIDEO]
3. Connect the AV IN [VIDEO]
4. Connect the HDMI IN
5. Connect the port of the TV and the RS/232 port of the RJP.
RJP
✎ The RJP (Remote Jack Pack) compatible with this Samsung TV is TeleAdapt TA-7610.
y RJP (Remote Jack Pack): RJP stands for Remote Jack Pack. The RJP is a hardware module that has different Audio
Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding output sources are connected
from the RJP to the TV. The RJP communicates with the TV via RS232. The Hot Plug & Play function allows hotel guests
to connect an external source to the RJP. The RJP communicates with the TV by sending messages regarding Active/
Inactive sources. The TV will switch to the Active external source according to the priority set by the User.
✎ You can select HDMI IN
✎ When the TV is on, connect the TV and the RJP within 10 seconds.

Connecting the RJP (Remote Jack Pack)

DATA DATA
PC/DVI AUDIO IN port of the TV to the PC/AUDIO port of the RJP.
/ [L-AUDIO-R] port of the TV to the VIDEO port of the RJP.
port of the TV to the VIDEO port of the RJP.
port of the TV and the HDMI port of the RJP.
and AV IN for connecting the RJP.
1 D-sub / PC Audio cable
RJP
PC / DVI PC / DVI
AUDIO IN AUDIO IN
AV IN
PC IN
HDMI IN
(DVI/ARC)
HP-ID HP-ID
RJP Rear
USB HDMI VIDEO AUDIO AUDIO/PC
4 HDMI cable
3 Video Cable
2 Audio Cable
5
37
English