Yamaha D5000 Operating Manual page 21

Sample
START
Playback
START
Playback
Playback loop
You can set a loop point within the sample. This sets the start point for repeats after the first
playback.
Sample
START LOOP
Playback
Page 3: Setting the pitch and MIDI note number
FREEZE PITCH parameters
PITCH ( Oct ~ Unison ~
Oct)
END
END
END
Press the [ DELAY ] key again to select the third page of the FREEZE
program.
Use the [ ^ ] and [ % ] CURSOR keys to move through the various
parameters. Modify the selected parameter by rotating the DATA ENTRY
encoder.
Set the pitch for playback. The D5000 can adjust the pitch by plus
or minus two octaves. When you change the pitch, the playback
time of the sample is also changed. As the pitch drops, the
playback time increases, and when the pitch is increased, the
playback time is shortened.
Parameter Edit Mode - 19
Sample
END
* Sound is reversed
END
Playback
* Sound is reversed
Sample
END LOOP
* Sound is reversed
START
Playback
START
START
Playback
D5000