Remove An 8800 Series Phone From The Wall Mount - Cisco 8000 Series Installation Manual

Wall Mount Your 8800 Series Phones
Plug in the Ethernet cable, and the power adapter
3
(optional).

Remove an 8800 Series Phone from the Wall Mount

1
Use a screw driver or other device to disengage the tabs.
2
Lift the phone to release it from the wall bracket.
3
Pull the phone toward you.
Attach the phone to the wall bracket by inserting
4
the tabs of the wall brackets into the slots on the
phone bracket.
2
1
Installation Guide for Cisco IP Phone with Multiplatform Firmware
Wall Mount Your Phone
3
2
1
25