8Band Input Eq; Input Delay - Yamaha TX4n Reference Manual

Panel Operations

■ 8Band Input EQ

This is an eight-band parametric equalizer that boosts or cuts the signal at the specified frequencies. For each channel, you can
make settings for each frequency band (BAND A–H).
Parameter name
Type
Q
Frequency
Gain
Bypass
EQ All Bands

■ Input Delay

Here you can specify a delay for the signal.
Parameter name
On
Delay Time
34
TX6n/5n/4n Reference Manual
Range
PEQ, L.SHELF 6, Selects the filter type. You cannot select the type for frequency bands
L.SHELF 12, other than the first and last (B–G). (They are fixed at PEQ.) For details
H SHELF 6, on the filter types, refer to
H SHELF 12, HPF, LPF
63.0–0.10 Specifies the width of each frequency band.
20.0 Hz–20.0 kHz Specifies the center frequency of each frequency band.
-18.0–+18.0 dB Specifies the gain for each frequency band.
ON/OFF Turns bypass on/off for each frequency band.
ON/OFF Turns the entire eight-band equalizer on/off.
Range
ON/OFF Turns the delay on/off.
0.00–1,300.00 ms Specifies the delay time.
Explanation
page 38.
Explanation