Parts List & View - Boston Acoustics TVeeTM Owner's Manual

The Parts of TVee
1
1 1
Status Indicator – Lights in various colors to indicate operating status. See the table below.
2 2
Power Button – Lets you manually activate TVee or put it in standby mode.
3 3
Mute Button – Lets you temporarily mute TVee.
4 4
Volume Up and Down Buttons – Let you manually adjust the volume of the TVee.
5 5
Wireless ID Switch – Selects the "channel" for the wireless Bass Unit signal. Set
6 6
Trim Level Switch – Adjusts the input sensitivity of TVee.
7 7
Inputs – Receives the input signal for the TVee. See the "Connect TVee" section for more information.
8 8
Power Input – Connect the power supply
9 9
Power On/Off Switch – Turns the TVee soundbar on or off . Normally it is left on all the time.
10 10
Power Supply – Provides power to the soundbar. Plug it into the wall and connect it to the power input
Soundbar Status Indicator
Green Steady
Green Blinks Once
Orange Flashing
Orange Steady
Flashing Green
Flashing Red
Flashing Red and Orange
2 3 4
MUTE
10
10 10
here.
MUTE
Normal power-on mode.
Shows a remote control signal is being received.
TVee is ready to learn a remote control command.
The control button that's learning a control command is selected; TVee waiting
for an IR command to learn.
TVee has successfully learned a remote control command.
TVee has failed to learn a remote control command.
Indicates learned IR codes successfully erased.
5 6 7 8
INPUT
R
DC24V
2.5A
TRIM LEVEL
2
WIRELESS ID 3 1
L
1 2 3 4
INPUT
POWER
R
DC24V
2.5A
TRIM LEVEL
2
3 1
L
WIRELESS ID
1 2 3 4
Audio connection cable
11 11
in the same position.
9
POWER
8.
3