Table of Contents
Advertisement
Usingthe subwoofer
Subwoofer rear paneE
Pre-adjustino the subwoofer
voJuNle
@Power indicator
Lights up in GREEN
when the POWER
switch
(@) is tnrned ON; turns off when the POWER
switch is turned
OFF.
@POWER switch
Press this switch to the ON position to turn on
the power to the subwoofer.
When the power of
the subwoofer
is on, the power indicator
(@) on
the rear panel lights up in green. Press this
switch again to set it to the OFF position
to turn
off the power of the subwoofer,
@VOLUNE control
Adjusts the volume
level, Tnrn the control
clockwise
to increase the volume,
and counter-
clockwise
to decrease
the volume,
@iNPUT terminal
Input terminal
for line level signals from the
amplifier,
Before you use the subwoofer,
first adjust the vol-
ume balance
between
the subwoofer
and the front
speakers
by following
the procedure
below,
Set the VOLUME
control to minimum
(0),
2. Turn on the power to all other components,
3.
Press the POWER
switch to the ON position,
The power indicator on the rear panel lights up
in green,
4. Play a source that contains
bass signal, Adjust
the amplifier's
volmne
control to the desired lis-
tening level,
5. Rotate the VOLUME
control gradually
to adjust
the volume
balance
between the subwoofer
_md
the other speakers,
To eJ_ioy natural bass sound,
keep the subwoofer
volume at a level where it is
barely distinguishable
from other speakers,
_. Adjust the volmne
of the entire sound system
using the amplifier's
volume control,
Note: h is recommended to set the
VOLUME control about in the middle
position when using in a multi channel
home theater system,
VOLUME
o
1o
4
Advertisement
Table of Contents
