Sentry Active Call Screener v3.1 Quick Start Manual

Quick Set Up (recommended)
1. Put in 3 AAA batteries. (not included)
2. Create White/Black List (without names)
• Use key pad to punch in the phone number with area code.
(Verify if "1" pre x if required)
• Press ACCEPT to save on White List; REJECT to save on Black List .
• To correct, use DEL/EXIT.
3. Connect SENTRY in between your phone and wall jack. (see diagram)
SENTRY is ready now.
Line
SENTRY
Custom set up
Create White List with names (optional)
• Press and hold ACCEPT until you see _ _ _
• Use dialpad to input phone number (area code + number)
• Press ACCEPT to save number, then enter name using dialpad, press ACCEPT again to save both number and name.
• To correct, use DEL/EXIT.
Record your own outgoing message (optional)
• To listen to default OGM, double click REC/PLAY.
• To record your own OGM, press and hold REC/PLAY until 'beep' , release button, then start recording(up to 20 seconds). Press
REC/PLAY again to stop and play back. To re-record, repeat above steps.
• Double press REC/PLAY to listen to OGM, double click DEL/EXIT to erase.
• Press OGM D/C button to choose C (custom message)
Phone
Active Call Screener v3.1