Connection; Lan Cable Connection - Yamaha CVP-505 User Manual

Connection

LAN Cable Connection

1
Connect the devices according to the example.
First turn the power of the instrument off, then connect the devices as shown in the illustration below, and finally
turn the power on again.
NOTE
• For an illustration of the location of the LAN terminal, refer to the Owner's Manual (Chapter 10).
Required Devices
• LAN cable
• Router cable (This is unnecessary if your modem has router capability.)
• Modem (ADSL modem, optical network unit or cable modem)
NOTE
• Before installing a new router, check that the router performs normally by connecting via a computer.
2
Press the [INTERNET] button.
When the special website appears
Since the instrument is connected to the special website, you do not need to make Internet settings.
the special website, refer to the Owner's Manual (Chapter 9).
NOTE
• The contents of the service as appearing here are current as of May, 2009. The available contents of the service are subject to change.
When the special website does not appear
Proceed to step 3.
NEXT PAGE
LAN
terminal
LAN cable Router cable
Internet
Modem
About the operations in
Internet Connection Guide
3