Names And Functions; Control Panel - Yamaha THR Series Reference Manual

Names and Functions

Control Panel

THR30IIA Wireless
@0
q
w
e r
q [
] (Power Button) / Power Button LED
This is the unit's power button.
When the power is ON, the Power Button LED, the lamp corresponding to the selected tone and the Power
Lamp in the speaker cabinet light up.
w LED Display
Indicates individual settings and conditions of the THR30IIA Wireless.
e [TAP/TUNER] button
 Tuner Function
Holding the switch for 1 second engages the tuner function and lights the
The tuner is calibrated to A4=440Hz. Tune the guitar until the desired pitch appears in the LED display.
When only the circle (
Pitch is low
Press the [TAP/TUNER] button again to turn OFF the tuner function*.
* When the tuner function is set to ON, the guitar is muted. The sounds from the [AUX] jack, [USB] jack and Bluetooth are out-
put to the main speaker and [PHONES] jack.

Tap Tempo Function
When a CHORUS/DELAY or DELAY effect is selected with the [EFFECT] knob !0 control, the tempo of the
delay can be set by tapping (more than twice) on the switch.

Extended Stereo Setting
Hold the [TAP/TUNER] button for more than five seconds to switch the Extended Stereo* function ON/OFF.
The Extended Stereo function produces a much wider stereo field. This affects the sounds from the [AUX]
jack, [USB] jack and Bluetooth as well as the guitar reverb effect. The Extended Stereo setting (ON/OFF) is
saved when the power is turned OFF.
ON: "#" on LED Display w is off (default setting).
OFF: "#" on LED Display w is lit.
@1
t y u i
) in the center of the
In tune
o !0 !1 !2
display is visible, tuning is accurate.
Pitch is high
THR30IIA Wireless
!7
!8
!6
!9
!5
!3 !4
indicators.
Reference Manual 3