Install New Power Supply - Fujitsu ETERNUS AB Series Hardware Maintenance Manual

| Power Supplies |
3. Locate the handle on the front of the power supply.
4. Use the handle to slide the power supply straight out of the system.
Attention: When removing a power supply, always use two hands to support its weight.
What to do next
Go to Install new power supply.

Install new power supply

You install a new power supply to replace the failed one. Install the power supply by gently sliding it into the
opening of the new controller.
Before you begin
• You have a replacement power supply that is supported for your controller shelf or drive shelf model.
• You have unpacked the replacement power supply.
• You have removed the failed power supply.
Procedure
Using both hands, support and align the edges of the power supply with the opening in the system chassis,
and then gently push the power supply into the chassis using the cam handle.
The power supplies are keyed and can only be installed one way.
69