Saving The S08 Data To Memory Card (Save) - Yamaha S08 Owner's Manual

Saving the S08 data to Memory
Card (Save)
You can save files to Memory Card as follows.
1 Press the [CARD] button. Card Mode screen
appears.
2 Use the [
] button to select the Save screen.
3 To overwrite an existing file, use the [DEC/NO] and
[INC/YES] buttons to select the File, then go to step 6.
4 Press the [ENTER] button to call up the screen for
Name entry.
5 Enter the file name (page 50).
6 Press the [ENTER] button to execute the
operation. A "Completed!" message appears when
the operation has been completed.
NEW _ F ILE
PAGE PART ELEM KEY
1
n If the Save operation would result in an existing file
being overwritten, a confirmation prompt appears.
Press the [INC/YES] button to save the file and
overwrite the original data, or press the [EXIT]
button to cancel.
OverWrite
PAGE PART ELEM KEY
1
n The data below can be saved to Memory Card.
•User Normal Voice 1 to 128
•User Drum Voice 1 and 2
•Multi 1 to 32
•System (Utility/controller, Sequence chain)
54
Using the Memory Card
Save
Sure?
Loading the S08 Data from Memory
Card (Load)
You can load files from Memory Card to the S08, as
well as select the type of data to be loaded.
❏ Settings: All , An User Normal Voice (1 to 128), An User
Drum Voice (1 and 2)
1 Press the [CARD] button.
Card Mode screen appears.
2 Use the [
] and [
screen.
3 Use the [DEC/NO] and [INC/YES] buttons to select
the File you wish to load.
n When selecting a file, the "FileNone" message will be
displayed if there is no file on Memory Card.
4 Press the [ENTER] button to call up the display for
selecting the data type.
All
PAGE PART ELEM KEY
2
5 Use the [DEC/NO] and [INC/YES] buttons to select
the data you wish to load. When selecting "All"
here, go to step 8.
n When selecting the "All," the data below will be
loaded.
•User Normal Voice 1 to 128
•User Drum Voice 1 and 2
•Multi 1 to 32
•System (Utility/Controller, Sequence chain)
6 Press the [
] button to call up the display for
selecting the destination user voice number.
>>001Synth
PAGE PART ELEM KEY
2
7 Use the [DEC/NO] and [INC/YES] buttons to select
the destination user voice number.
8 When you press the [ENTER] button, you will be
prompted for confirmation.
NEW FILE
PAGE PART ELEM KEY
2
n The operation will be canceled if you press the
[EXIT] button.
9 Press the [INC/YES] button to execute the
operation. A "Completed" message appears when
the operation has been completed.
] buttons to select the Load
Load
Load
Sure?