All-Track Recording (Realtime And Punch-In) - Yamaha QS300 Owner's Manual

All-track Recording (Realtime and Punch-in)

The All-track Recording mode allows simultaneous realtime
(or punch-in) recording of all 16 sequencer tracks. This can
be useful when you want to record complete sequences
from another sequencer or music computer which is not
data-compatible with the QS300.
To use All-track Recording: .................................................
1.
Select a Song for recording.
2. Press RECORD to set record to standby and select
Realtime Recording (^) or Punch-in Recording
(&).
Press ! (AllTr) to enable All-track Recording.
3.
Channel/Track bar appears in reverse
display, indicating All-track Recording
is active.
F1 F2 F3
Press ! to enable All-track
Recording.
4. To record, follow the steps described in Realtime
Recording (steps 4 and 7 - 9 ) or Punch-in Recording
(steps 4 - 7 ) above.
The record procedure is exactly the same as that described
for realtime or punch-in recording, except that all 16
sequencer tracks are recorded simultaneously (assuming, of
course, that appropriate MIDI data is received on the
corresponding MIDI channels — see the MIDI Channel
parameter, page 94).
100
F4 F5 F6 F7 F8