Backup And Initialization; Backup; Initialization - Yamaha Portatone PSR-E313 YPT-310 Owner's Manual

Backup and Initialization

Backup

The following settings are always backed up, and are maintained even
when the power is turned off. If you want to initialize the settings, use the
Initialize operation as explained below. You can also save the settings as
backup data to your computer, by using the Musicsoft Downloader (MSD)
software. Refer to the section "Transferring a backup file from the PSR-
E313/YPT-310 to a computer" on page 68.
● Parameters that are saved in backup:
• User Songs
• Style number 107
• Touch Response on/off setting
• The following Function settings: Tuning, Split Point, Touch
Sensitivity, Style Volume, Song Volume, Metronome
Volume, Demo Cancel, Panel Sustain

Initialization

This function erases all backup data in the instrument's flash memory and
restores the initial default settings. The following initialization procedures
are provided.
Backup Clear
To clear data backed up to the internal flash memory (described above),
turn the power on by pressing the [STANDBY/ON] switch while holding
the highest white key on the keyboard. The backed up data will be erased
and the default values restored.
Flash Clear
To clear Song data and Style data that has been transferred to the internal
flash memory from a computer, simultaneously hold down the highest
white key and the three highest black keys on the keyboard and turn the
power on by pressing the [STANDBY/ON] switch.
CAUTION
• When you execute the
Backup Clear operation,
backup parameters will
be cleared.
CAUTION
• When you execute the
Flash Clear operation,
Song data and Style data
you have purchased and
downloaded will also be
cleared. Make sure to
save your important data
by transferring to a com-
puter using Musicsoft
Downloader (page 68).
PSR-E313/YPT-310 Owner's Manual
31