Table of Contents
Advertisement
[Digital Out]
Selects the desired data to be output from the [DIGITAL
OUT] jack.
[OUTPUT]: Select this when you output the same audio
signals as the ones for the Monitor
speakers*.
[OMNI OUT]:
Select this when you output the same audio
signals as the ones to be output from the
[OMNI OUT] jacks.
[SYNC OUT]:
Select this when you output the same audio
signals as the ones to be output from the
[SYNC OUT] jacks.
[OFF]:
Select this when you cancel the data
transmission from the [DIGITAL OUT]
jack.
* Only for models supplied with the Monitor speakers.
1
Tap on
in the [Main] screen,
and then on
2
Tap on [OMNI IN]/[OMNI OUT]/
[Digital Out], and then press
select the desired option.
3
Tap on
to complete the
operation.
.
to
Lyric Screen
By hooking up a TV or a monitor display to the I/O
Center, lyrics are automatically displayed on the TV or
the monitor display during playback a song with lyrics
prerecorded.
Note:
For purchasing songs with lyrics, consult
your Disklavier dealer.
Note:
For users in North America, refer to page 27
thru 29 in the "Tablet Controller Operating Manual"
as well.
Showing the Lyrics on a TV or a
Monitor Display during Playback
1
Hook up a TV or a monitor display to
the I/O Center.
TV, monitor display, etc.
To Video input
RCA cord
(not supplied)
I/O Center (Right side)
2
Turn on the TV or the monitor display,
and then select the input mode that
corresponds to the connected TV or
monitor display.
CHAPTER 6: Other Settings
Continue to next page...
64
Advertisement
Table of Contents
