Yamaha Electone EL-400 Owner's Manual page 102

2) Melody On Chord
1
Press the A.B.C./M.O.C. button in the DISPLAY SELECT section.
The A.B.C. page appears. Press the Page buttons to select Page 2.
2
Then set the KNEE control to "on," and select one of the modes.
DATA CONTROL
3
Press the Knee Lever to the right with your knee when you want to
have M.O.C. effect.
M.O.C. effect is applied while the Knee Lever is pressed.
3) Lead Slide
1
Call up the Lead Condition display, by pressing a Lead Voice button.
7
2
Press the Page buttons to select Page 5.
DATA CONTROL
3
Then set the Time parameter and select KNEE
4
Press the Knee Lever to the right with your knee when you want to
have Slide effect.
Slide effect is applied while the Knee Lever is pressed.
102
DISPLAY SELECT
VOICE EFFECT A.B.C. FOOT REGIST.
DISPLAY SET M.O.C. SW. SHIFT
PITCH TREMOLO
MIDI (FAST)
DATA CONTROL
DATA CONTROL
NOTE:
If the KNEE is set to "on," the Melody On
Chord cannot be applied without using the
Knee Lever.
PAGE
NOTE:
If the KNEE is set to "on," the Slide effect
cannot be applied without using the Knee
Lever.