Windows 2000 - Yamaha DME Setup Manual

■ Windows 2000

1
Start the computer and log on with
administrator privileges while power to the DME
is off.
2
Select [My Computer] ➞ [Control Panel] ➞
[System] ➞ [Hardware] ➞ [Driver Signing] ➞
[File Signature Verification] and check the radio
button to the left of "Ignore—Install all files,
regardless of file signature" and click [OK].
Restore this setting to its original state after the
installation has been completed.
3
While the DME power is still off, connect the
computer to the DME unit via a USB cable.
4
Turn the DME power on, and the "Found New
Hardware Wizard" message will appear
automatically.
Click [Next].
5
Select [Search for a suitable driver for my device
(recommended)] ➞ [Specify a location], click
[Browse] to specify the downloaed and
extracted "Driver" folder, then click [OK].
6
Click [Next] to start the installation.
7
When a message appears indicating that the
driver has been successfully installed, click
[Finish].
8
Restart the computer when a message appears
prompting you to do so.
The driver has been installed.
DME Setup Manual
5