Adjusting The Tempo; Tempo Button; Backing Button - Yamaha DD-50 Owner's Manual

BACKING
BEAT
on
BEAT
oF
The song tempo can be set anywhere from 40 to 280 beats per minute. As tempo numbers increase,
the tempo will become faster.
PRESET TEMPO
BEAT
SONG TEMPO
50
40 41 , , 7 , 9 , 8 , 0
PRESET TEMPO
SONG TEMPO
BEAT
90
2
Select ON or OFF
Press the [BACKING] button and the current ON/OFF setting will
appear in the display. Turn the DIAL to the right (clockwise) to activate
the Auto Kit Select (on). Turn to the left (counter-clockwise) to deactivate
the Auto Kit Select (oF).
3
Exit the Auto Kit Select
Press the [DEMO] and [START/STOP] buttons simultaneously once
again to exit the MIDI/Utility Mode .
• The Auto Kit Select is automatically set to "OFF" when the MIDI Transmit Note is
changed to another channel.

Adjusting the TEMPO

1
Press the [TEMPO] button
Press the [TEMPO] button, the current tempo value (40-280) appears
in the display.
Tempo Display
q=90
90
q=110
, 1 0
q=250
, 5 , 0
2
Set the Tempo
Use the DIAL to select the TEMPO. Turn the DIAL to the right
(clockwise) to increase Tempo values, turn to the left (counter-clockwise)
to decrease Tempo values. (Tempo values will cycle to 40 or 280 then stop.)
3
Exit the Tempo setting mode
Press the [SONG] button to exit from the Tempo setting mode.
• When both the SONG and TEMPO buttons are pressed simultaneously, the
preset tempo of the currently selected song will automatically applied.
About the Beat Indicator
During song playback, the two beat lamps in the display will flash
in a specific pattern to assist you in keeping the beat.
q= 90 beats per minute.
1st beat 2nd beat
, 9 , 0
Playing a SONG
Comment
—
100th digit (1) is shown as a single dot
100th digit (2) is shown as two dots
3rd beat 4th beat
9, 0 9, 0 9, 0
11