ResMed AirFit N20 User Manual page 15

International
Commission on
Non-Ionizing
Radiation
Protection
(ICNIRP)
Service life
Mask setting
options
Notes:
• This product is not made with PVC, DEHP, DBP or BBP.
• This product is not made with natural rubber latex.
• The manufacturer reserves the right to change these specifications
without notice.
Storage
Ensure that the mask is thoroughly clean and dry before storing it for any
length of time. Store the mask in a dry place out of direct sunlight.
Disposal
This mask does not contain any hazardous substances and may be
disposed of with your normal household refuse.
Magnets used in this mask are within ICNIRP guidelines for general
public use.
The service life of the AirFit N20 mask system is dependent on the
intensity of usage, maintenance, and environmental conditions to
which the mask is used or stored. As this mask system and its
components are modular in nature, it is recommended that the user
maintain and inspect it on a regular basis, and replace the mask
system or any components if deemed necessary or according to the
'visual criteria for product inspection' in the 'Cleaning your mask at
home' section of this guide. Refer to the 'Mask components' section
of this guide for information of how to order replacement parts.
For AirSense, AirCurve and S9: Select 'Pillows'.
For other devices: Select 'SWIFT' (if available), otherwise select
'MIRAGE' as the mask option.
English 9