Yamaha mc-1202 Operating Manual page 9

7
Talkback ON Switch
Pressing this switch activates the talkback microphone plugged into the talkback mic connector,
allowing voice communication from the console operator to the STEREO, AUX 1, AUX 2 or
AUX 3 busses according to the setting of the talkback assignment switches.
TB (Talkback) Level Control
Adjusts the level of the talkback signal sent to the selected buss.
Talkback Microphone Connector
This female XLR type connector accepts just about any standard 50
for talkback pickup. A gooseneck-type microphone that can be positioned for the most com-
fortable operation is an excellent choice.
Talkback Assignment Switches (AUX1/AUX2/AUX3/ST)
These switches allow the talkback signal to be fed to the STEREO, AUX 1, AUX 2 or AUX 3
busses. Any number of switches may be ON at the same time, so you can "talk back" to a
number of the console's busses at once.
~
600 ohm microphone