Editing The Channels - LG 32LM500BPUA Owner's Manual

Configuring digital sound output settings
(Settings) → [Sound] → [Sound Out] → [Digital Sound Out]
You can configure the [Digital Sound Out] settings.
• These settings are available only when an Optical is selected.
Sound Input
MPEG
Auto Dolby Digital
HE-AAC
PCM All
To use sound test
(Settings) → [Sound] → [Sound Test]
Try Sound Test to verify that sound signal output is normal. When the
test sound is normal, check connected external devices or broadcast
signal.
To set up the channels automatically
(Settings) → [Channels] → [Auto Tuning]
Memorizes automatically the channels being broadcast.
• The channels will not be memorized properly if the antenna/cable
is not installed correctly.
• [Auto Tuning] memorizes the channels that are currently being
broadcast.
• If [Lock System] is turned on, a pop-up window will appear asking
for password.
To set up the channels at manually
(Settings) → [Channels] → [Manual Tuning]
Adjusts channels manually and saves the results. For digital
broadcasting, signal strength, etc. can be checked.

Editing the channels

(Settings) → [Channels] → [Channel Manager]
Edits the saved channels.
12
To set Language
You can select the language of the menu displayed on the screen and
the digital sound broadcasting.
Digital Sound Output
PCM
Dolby Digital
PCM
To set current time
PCM
Checks or changes the time while watching TV.
To use Sleep Timer
Turns off the TV after a prescribed number of minutes.
To turn on/off the TV
[Timer Power Off]
You can set the Power On/Off time for the TV.
(Settings) → [General] → [Language]
• [Menu Language]: Selects a language for the display text.
• [Audio Language]: (In Digital mode Only) Selects the desired
language when watching digital broadcasting containing several
voice languages.
(Settings) → [General] → [Time & Date] → [Set Automatically]
• Synchronizes the TV clock to the digital time information sent by
the TV station.
• [Time] / [Date] / [Time Zone]: Sets the time and date manually if
the auto setup does not correspond to the current time or region.
• [Daylight Saving]: Daylight Saving Time refers to the practice of
setting the clocks forward one hour from standard time during the
summer months.
(Settings) → [General] → [Timers] → [Sleep Timer]
• To deactivate the [Sleep Timer], select [Off].
(Settings) → [General] → [Timers] → [Timer Power On] /
• Select [Off] if you are not going to set [Timer Power On] / [Timer
Power Off].
• To set [Timer Power On] / [Timer Power Off], set the current time
correctly.