Level 1 Repair
Boot Recovery for damaged device
3.
(1) Insert SD card to "No power" device
(2) Enter to download mode, using key combination(Volume down + Home + Power)
(3) If the device is successfully recovered, the device will enter download mode.
Volume up
(4) After entering download mode, download full S/W to the device including
BL(Bootloader), AP(Platform binary), CP(Modem binary) and CSC.
6-18
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.