Dishwasher Control Section - Kenmore ULTRA WASH 665.1309 Series Use & Care Manual

Hide thumbs

Table Of Contents

Table of Contents

Options

High Temp

Raises main wash temperature to improve cleaning for

loads containing tough, baked-on food.

Sani Rinse

This high temperature option sanitizes your dishes and

glassware in accordance with National Sanitation

Foundation (NSF)/ANSI Standard 184 for Residential

Dishwashers. Certified residential dishwashers are

not intended for licensed food establishments. The

word Sanitized will light at the end of the cycle when

successfully completed. If Sanitization is not achieved

(most often due to cycle interruption) the word Sanitized

will flash.

Heated Dry

Turns the heat element on after the wash portion of the

cycle is over. Use rinse aid with or without the Heated

Dry option for best drying results. Plastic items are less

likely to deform when loaded in the top dish rack.

*The maximum additional water used for any combination of options is 4.8 gal. (18.2 L).

Delay Hours (on some models)

Use this option to run your dishwasher during off-peak hours. Local utility providers recommend using energy during off-peak hours

when possible. Delay displays how many hours Before the cycle will begin.

To delay the start

1. Select a wash cycle and options.

Press the DELAY button. Each time you press the DELAY button it will display the next available delay time.

Press START/RESUME to begin the delay countdown.

NOTE: Anytime the door is opened (such as, to add a dish), the START/RESUME button must be pressed again to resume the delay

countdown.

Control Lock Option

Use the Control Lock option to avoid unintended use of the dishwasher between cycles. When the Lock indicator is lit, all buttons are

disabled. The dishwasher door can still be opened or closed while the controls are locked.

To turn on the Lock

Press and hold SANI RINSE for 3 seconds. The Lock indicator will light up. If you press any pad while your dishwasher is locked, the

light flashes 3 times.

NOTE: The dishwasher cannot start if the control is locked.

To turn off the Lock

Press and hold SANI RINSE for 3 seconds. The light turns off.

Can be selected

with

SmartWash

Pots & Pans

Normal Wash

SmartWash

Pots & Pans

Normal Wash

Available with

any cycle

except

Quick Rinse