Canon imageRUNNER ADVANCE C5500 Series Customer Expectation Document page 50

imageRUNNER ADVANCE C5500 and C5500 II Series Customer Expectations Document
Staple Finisher-Y1 and 2/3 Hole Puncher Unit-A1 Table Continued
Item
Capacity Per Tray
IMPORTANT
• The Staple-Free mode can only be used with Thin, Plain, Color, Recycled, and
Pre-Punched paper.
• The Staple Finisher-Y1 can staple any other paper type except, Transparencies,
Tracing Paper, and Labels.
24 If the customer uses Thin Paper (14 to 15 lb bond (52 to 59 g/m2)), the tray can hold approximately 1,500 sheets
(or 8 1/2" (216 mm) in height).
Version 6
imageRUNNER ADVANCE C5500 and C5500 II Series Customer Expectations Document
Tray
No Collating,
Collate and
Group Modes Set
B
(Upper)
Offset (Collate &
Group)
With Different
Paper Sizes
No Collating,
Collate and
Group Modes Set
22
Offset (Collate &
Group)
A
(Lower)
Corner/Double
Staple
Staple-Free
C
(Inner)
Specifications
Mode
LTR, EXEC, STMT, and STMTR:
250 sheets (or 1 7/8" (47 mm) in height)
12 5/8" x 17 11/16", 12" x 18", 11" x 17", LGL,
LTRR:
125 sheets (or 1" (24 mm) in height)
LTR and EXEC:
250 sheets (or 1 7/8" (47 mm) in height)
11" x 17":
125 sheets (or 1" (24 mm) in height)
125 sheets (or 1" (24 mm) in height)
LTR, EXEC, STMT, and STMTR:
3,000 sheets (or 16 5/8" (423 mm) in
24
height)
12 5/8" x 17 11/16", 12" x 18", 11" x 17", LGL,
LTRR:
1,500 sheets (or 8 1/2" (216 mm) in height)
LTR and EXEC:
3,000 sheets (or 16 5/8" (423 mm) in
24
height)
11" x 17", LGL, and LTR:
1,500 sheets (or 8 1/2" (216 mm) in height)
LTR and EXEC:
Total of 200 sets or 3,000 sheets
(or 16 5/8" (423 mm) in height)
11" x 17", LGL and LTRR:
Total of 100 sets or 1,500 sheets
(or 8 1/2" (216 mm) in height)
LTR:
11" x 17": 100 sets
Up to 100 sheets (21.7 lb bond (81.4 g/m
Paper Size
200 sets
Page 50
2
))