Yamaha Clavinova CGP-1000 Owner's Manual page 102

Voice Creating (Voice Set)
Vibrato:
A quavering, vibrating sound
effect that is produced by regu-
larly modulating the pitch of the
Voice.
Switching the VIBE ROTOR
on/off with a pedal
You can use a pedal to switch the
VIBE ROTOR on/off (when the
VIBE ROTOR ON/OFF function
is properly assigned; page 191).
102 CGP-1000 Owner's Manual
● EG
The EG (Envelope Generator) settings determine how the level of the sound
changes in time. This lets you reproduce many sound characteristics of natural
acoustic instruments—such as the quick attack and decay of percussion sounds, or
the long release of a sustained piano tone.
ATTACK Determines how quickly the sound reaches its maximum level after
the key is played. The lower the value, the quicker the attack.
DECAY Determines how quickly the sound reaches its sustain level (a
slightly lower level than maximum). The lower the value, the
quicker the decay.
RELEASE Determines how quickly the sound decays to silence after the key is
released. The lower the value, the quicker the decay.
Level
● VIBRATO
DEPTH Determines the intensity of the Vibrato effect. Higher settings result
in a more pronounced Vibrato.
Determines the speed of the Vibrato effect.
SPEED
DELAY Determines the amount of time that elapses between the playing of
a key and the start of the Vibrato effect. Higher settings increase the
delay of the Vibrato onset.
Pitch
EFFECT/EQ
1. REVERB DEPTH/CHORUS DEPTH/DSP DEPTH
Adjusts the reverb (page 93) depth.
REVERB DEPTH
CHORUS DEPTH Adjusts the chorus (page 93) depth.
DSP DEPTH Adjusts the DSP (page 93) depth.
If you want to re-select the DSP type, you can do so in the DSP
menu explained on page 103.
Determines whether the DSP is on or off.
DSP ON/OFF
VIBE ROTOR This will be displayed only if VIBE VIBRATE is selected for the DSP
Type parameter explained on page 93. Determines whether VIBE
VIBRATE should be set to on or off when selecting the Voice.
Sustain level
ATTACK DECAY RELEASE Time
Key on Key off
SPEED
DEPTH
DELAY
Time