Speaker Settings - Yamaha DVD-S2300 Owner's Manual

Speaker settings

Set the parameters for 6CH DISCRETE output to suit the
speaker system.
, , ,
/ ENTER
If you select "Multi-channel" from the Setup menu, set
parameters a, b, and c (page 29 and page 30) according
to the speaker system.
Setting panel
Main (L)
a
Exit
SETUP
L
Exit
Test
SELECT
LS
ENTER RETURN
Test signal
(L) a (L) c b (R) c (R) a
DVD-A DVD-V
Center Main (R)
b a c a
R
ms C dB
0 0
dB
SW
0
dB ms dB
RS
0 0 0
Rear
Subwoofer
c a
CHANGING THE DVD MODE SETTINGS
a a a a Speaker selection and size
1 Press the cursor buttons (k k k k , n n n n , l l l l , h h h h ) to
select a speaker, then press ENTER.
The indicator is displayed above and below the
speaker icons.
2
Press the cursor buttons (k k k k , n n n n ) to select a
setting, then press ENTER.
• Speaker size options:
L: Large, Small
R: Large, Small
C: Large, Small, None
SW: Used, Not used
LS: Large, Small, None
RS: Large, Small, None
The left (L or LS) speaker size is automatically
assigned to the right (R or RS) speaker. (For example,
if you select Large for the L speaker, the R speaker
will automatically be set to Large.)
• Example: Left rear speaker
1 2
LS
1 No icon appears when the speaker is not used.
2 This icon appears when using a large speaker
capable of low-frequency (under 100 Hz) output.
3 This icon appears when using a small speaker that
is not capable of low-frequency output.
• Factory default speaker-size settings:
L/R: Large
C/LS/RS: Large
SW: Used
3
LS
29