Table of Contents
Advertisement
Preparing the CRW3200SX Drive
SCSI cable
• The connector of SCSI cables or SCSI interface cards varies. A SCSI cable with proper
connectors for both the CRW3200SX drive and the SCSI interface card is required.
SCSI connector of the CRW3200SX drive is D-sub half-pitch 50-pin pin-type.
D-sub half-pitch 50-pin pin-type (for the CRW3200SX drive)
Half-pitch 50-pin Centronics
• The maximum total length of the SCSI cables depends on the number of external
SCSI devices connected to the computer.
The number of external SCSI devices
connected to the computer
Note
For proper operation, connecting the devices with isometric SCSI cables is
recommended. (An example of connection: connecting 3 external SCSI devices)
Computer
The maximum total length of SCSI cables is 3.0 m.
• An Ultra SCSI mode compatible high impedance cable (characteristic impedance: 100
± 10 ) is required.
13
1 to 3 SCSI devices
4 to 7 SCSI devices
External SCSI devices
1 m
1 m
CORRECT
INCORRECT
The maximum total length
of the SCSI cables
3.0 m
1.5 m
1 m
Advertisement
Table of Contents
