Related Manuals for Yamaha CRW2216E Series
Summary of Contents for Yamaha CRW2216E Series
-
Page 1: User Guide
CRW2216E SERIES User Guide Guide de l’utilisateur Bedienungsanleitung READ/ DISC WRITE... - Page 2 If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Systems Technology, Inc. 100 Century Center Court, San Jose, CA95112, U.S.A.
- Page 3 Laser Diode Properties Material : GaAlAs Wavelength : 783-789 nm Emission Duration : Continuous Laser Output Power : Less than 44.6 W* his output is value measured at a distance 200mm from the objective lens surface on the optical pick-up block. ANSI Class : Class 1 CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT...
- Page 4 • The temperature where CRW2216E is located should be between 5ºC and 40ºC (41ºF – 104ºF), when used in a fan-cooled system. • Do not disassemble the CRW2216E cover to reduce the risk of electric shock. • Always remove the disc before transporting CRW2216E.
- Page 5 • The CRW2216E contains no user serviceable parts. Refer all servicing to qualified personnel. • If any of the following should occur, the CRW2216E should be serviced by qualified personnel: Metal objects or liquids get inside the CRW2216E.
-
Page 6: Table Of Contents
Chapter 1 - System Configuration ...3 Computer ...3 Software ...3 Tools ...4 Discs ...4 Chapter 2 - Installing the Yamaha CRW2216E Drive ... 5 MASTER/SLAVE settings ...5 Installing the CRW2216E drive ...7 Chapter 3 - Operation ...12 Front Panel ...12 Loading a Disc ...13... -
Page 7: Introduction
CRW2216E Features 2xS Recording (Rewritable) - 2xS Recording (Recordable) - 16xS Reading The CRW2216E is able to write (overwrite) CD-RW discs at double speed, and is able to write CD-R discs at double speed, or normal speed. CD-R discs can also be read at a maximum of 16X speed. -
Page 8: Orange Book Compatible Recording
New sessions can be written later. Packet Writing This is useful for data back-up. Smaller units of data can be added to tracks. To use this mode, your software must support Packet Writing. The CRW2216E supports both sequential and random packet writing. -
Page 9: Chapter 1 - System Configuration
Chapter 1 - System Configuration Before using the CRW2216E, make sure that you have all of the items on the list of included items. In order to use the CRW2216E, you will require the following. Computer The following operating environment is required: •... -
Page 10: Tools
Tools Phillips screwdriver This is used to remove the cover of your computer, and to install the Yamaha CRW2216E drive. Long nose pliers These are used to insert or remove the jumper pin when setting the MASTER/SLAVE settings of the Yamaha CRW2216E drive. -
Page 11: Chapter 2 - Installing The Yamaha Crw2216E Drive
Normally, a hard disk is connected to the primary connector, and a CD- ROM drive is connected to the secondary connector. Important: Avoid connecting the CRW2216E or a CD-ROM drive to the same pri- mary connector as the hard disk drive. - Page 12 As shown in the diagram at the right, insert the jumper pin into the right edge of the jumper switch. Note: If only the CRW2216E will be connected to the IDE interface connector, connect the CRW2216E to the end of the connector.
-
Page 13: Installing The Crw2216E Drive
1. Switch off your computer, and unplug it from the AC outlet. If you fail to do this, there is a danger of electric shock and/or of causing short circuits, which may damage the computer and/or CRW2216E drive. O F F PUSH 2. - Page 14 4. Remove the front cover of a vacant half-height drive bay. For details refer to the manual of your computer. 5. Slide the CRW2216E drive into the drive bay from the front. At this time, be careful not to apply excessive force to the drive itself.
- Page 15 Connect the single 4-pin connector (Sound Blaster compatible) to the sound card. Connect the 4-pin connector at the other end of the cable (the larger connector) to the AUDIO OUT connector on the CRW2216E drive. The polarizing lug should be at the top. ID E...
- Page 16 8. Connect the power supply cable. Connect the +12V and +5V 4-pin power cable to the power supply interface located on the rear panel of the CRW2216E drive. The shape of the connector makes it impossible to reverse the connec- tions.
- Page 17 11. Connect the power cable to an AC outlet, and switch on your computer. Make sure that the LED located on the panel of the CRW2216E drive is lit. 12. Start up your operating system, and verify that the CRW2216E is recognized by the operating system.
-
Page 18: Chapter 3 - Operation
This control adjusts the volume level of the headphone output. Rotating the control clockwise will increase the volume level. 4 ON/DISC LED This indicator lights up in orange when the CRW2216E is powered on, and lights up in green when the CRW2216E contains a disc. 5 READ/WRITE LED This indicator lights up in green when data is being read, and flashes... -
Page 19: Loading A Disc
6 Eject button This button is used to open or close the tray. 7 Manual Eject hole This is used to manually eject a disc that cannot be ejected in the nor- mal way. It is for emergency use only. Loading a Disc 1. -
Page 20: Ejecting The Disc
Press the eject button to eject the disc. Note: You cannot eject the disc if the ATAPI command prohibits the eject operation while the CRW2216E is reading data. Caution: Be sure to remove the disc after it is completely ejected. (Trying to remove the disc before it is completely ejected may cause the drive to malfunction.) -
Page 21: Manual Eject (Emergency Use)
The spring-loaded mechanism ejects the disc. V O L 2. After manually ejecting a disc, you must turn off the power supplied to the CRW2216E, then turn it on before continuing. Chapter 3 - Operation R E A W R IT... -
Page 22: Troubleshooting
Troubleshooting Troubleshooting If CRW2216E is not performing as expected, look up the symptoms in the following table, and take the appropriate corrective action. Symptoms The power to the CRW2216E is off The CRW2216E is not recognized by the computer The disc tray will not open... -
Page 23: Appendix
Appendix Specifications Interface ATAPI (E-IDE) Data Capacity 650MB (74 minutes disc) 550MB (63 minutes disc) Record/Read Speed Writing (CD-RW): 2X speed Writing (CD-R): 1X speed (real-time), 2X speed playback: 9 - 16X speed [Max] (partial CAV) Note) Read CD-DA : 10X speed [Max] Data Transfer Rate 150 - 2400KB/sec Burst Transfer Rate... -
Page 24: Front Panel Indicator Key
Appendix Front Panel Indicator Key on: green on: orange Status Reset Ready (no disc) Inserting disc Ejecting disc Ready (disc inserted) Seeking Preparing to write Writing Writing (test mode) Playback flashing: green — off flashing: orange ON/DISC READ/WRITE — — —... - Page 25 French: Pour plus de détails sur les produits, veuillez vous adresser à Yamaha ou au distributeur le plus proche figurant dans la liste suivante : German: Bei weiteren Fragen wenden Sie sich Sitte an Ihren Händler oder eine der folgenden Firmen.