Yamaha CDC-625 Owner's Manual page 8

To advance or reverse play rapidly (MANUAL SEARCH)
To advance rapidly
(press and hold)
To reverse rapidly
Selecting time displays
You can select any of the four time displays by pressing the TIME display mode-select button.
Elapsed time of the track now playing
Remaining time of the track now playing
Notes
The remaining time
number 21 or higher.
You can also select one of the three levels of brightness of
the display by pressing the
DIMMER button.
When you listen with headphones
Connect the headphones to the PHONES jack and adjust the volume by using the OUTPUT LEVEL control. At that time, note
that this adjustment will also vary the level of the signal output to the amplifier.
8
(press and hold)
will not be displayed for track
The sound can be heard (although slightly garbled) during
manual search in either direction. This is convenient for
locating a precise position within a track, or for reviewing the
contents quickly.
Manual search can also be performed while disc play is
paused , though no sound will be heard.
Total remaining time on the disc
Total disc play time
or