Installing Or Replacing The Remote Batteries; Setting Up The Remote To Control Other Sources; Finding Device Codes; To Control Your Tv - Bose Cinemate Cinemate Digital Home Theater Speaker System Owner's Manual

S S
YSTEM ETUP

Installing or replacing the remote batteries

Figure 15
Installing the remote
control batteries

Setting up the remote to control other sources

14
1. On the back of the remote, slide open the battery compartment. If you are replacing
batteries, remove and discard the old batteries.
2. Insert two new AA (IEC-R6) 1.5V batteries, or their equivalent, as shown in Figure 15.
(Two AA batteries are supplied in the product carton.) Match the plus (+) and minus (–)
marked on the batteries with the plus (+) and minus (–) inside the battery compartment.
3. Slide the battery compartment cover back into place.
Note: Replace the batteries when the remote control stops operating or its range seems reduced.
(2) AA batteries (IEC-R6)
Battery compartment cover
The universal remote control provided with your CineMate
programmed to control your TV, cable/satellite box, VCR, DVD player, and Digital Video
Recorder (DVR) such as TiVo brands or ReplayTV brands. With the CineMate universal
remote, you can enjoy the convenience of using only one remote control for all your home
theater equipment.

Finding device codes

In order to control your TV and other sources with the universal remote control, you must
program the remote with a five-digit device code for each source.
To find device codes for your source, see the CineMate Universal Remote Device Codes
book included in the product carton.
Note: More than one code may work with your particular brand of device. If you notice a lack of
response or limited functionality after setting up the remote, try a different code.

To control your TV

The steps below show how to set up the remote to control your TV. To set up the remote to
control other sources, you will need to follow the same procedure, using the appropriate
device code and source button for each source.
1. Locate the TV section in the CineMate Universal Remote Device Codes book.
2. Locate the five-digit device code(s) for your brand of TV and start with the first one.
3. Press and hold Setup on the remote until all five source buttons light up.
Français
+
+
Español English
™ speaker system can be