Water Separator Warning Indicator; Warning System; Overheat Warning (Twin Engines) - Yamaha F200D Owner's Manual

Basic components
Press the " " (mode) button repeatedly
until the indicator on the face of the gauge
points to " " (synchronizer).
1. Port engine speed is higher
2. Port engine speed is slightly higher
3. Engine speed is synchronized evenly be-
tween port and starboard engines
4. Starboard engine speed is slightly higher
5. Starboard engine speed is higher
NOTE:
If the two engines' speeds are not synchro-
nized while cruising, they can be synchro-
nized by adjusting trim angle or throttle.
EMU26791

Water separator warning indicator

This indicator will blink when water has accu-
mulated in the water separator. In such an
event, stop the engine and drain the water
from the separator.
24
ZMU01753
1
2
3
4
5
ZMU01754
NOTE:
This indicator only operates when a water
separator sensor is equipped.
EMU26801

Warning system

ECM00090
CAUTION:
Do not continue to operate the engine if a
warning device has activated. Consult
your Yamaha dealer if the problem cannot
be located and corrected.
EMU26822

Overheat warning (twin engines)

This engine has an overheat warning device.
If the engine temperature rises too high, the
warning device will activate.
Activation of warning device
The engine speed will automatically de-
G
crease to about 2000 r/min.
If equipped with an overheat warning indi-
G
cator, it will light.
ZMU01755
ZMU01757