Table of Contents
Advertisement
Quick Links
Instruction Manual
Battery Brushless Motor Crimping Tool
P/N: 902-605
Due to continuing improvements, actual product may differ
slightly from the product described herein.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL
SAVE THIS MANUAL
Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the month and year of
purchase. Keep this manual and the receipt in a safe and dry place for
future reference.
IMPORTANT SAFETY INFORMATION
In this manual, on the labeling, and all other information
provided with this product:
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which,
if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which,
if not avoided, could result in death or serious injury.
CAUTION, used with the safety alert symbol,
indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Advertisement
Table of Contents
Related Manuals for Eclipse 902-605
Summary of Contents for Eclipse 902-605
- Page 1 Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the month and year of Battery Brushless Motor Crimping Tool P/N: 902-605 purchase. Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: General Safety Rules
Do not wait to charge the battery until the when the power is completely drained, GENERAL SAFETY RULES it may cause the battery to stop working. Please keep the battery out of the tool to avoid power discharge. TO WORK IN SAFE CONDITIONS WITH THIS TOOLING, IT IS IMPERATIVE TO Please do not burn the battery or make it being short-circuited, it may cause READ THE DIRECTIONS CAREFULLY FOR USE AND TO FOLLOW THE explosion. -
Page 3: Specific Safety Rules
UNDERSTAND YOUR TOOL 902-605 is a tool for crimping Cu/Al lugs with cable from AWG 8 to 500 MCM. It is powered by Li-ion, actuated by motor and controlled by MCU, with OLED display and a... -
Page 4: Description Of Components
2. Description of components: 3. Function description Microcomputer control system-automatically detects the pressure when in crimping with double safety protection. OLED display - Dot matrix OLED display, which shows crimp times, battery power, working pressure (if equipped with pressure sensor), maintenance reminder and fault code. - Page 5 the temperature over 60℃ under long time working, the fault signal sounds, it means the toll can’t continue work until the temperature reduce to the normal. Series OLED screen What it Instruction (red) (white) means Self-checking to ¤¤ Self-checking assure everything （2Hz）...
- Page 6 1. Charging 2. Usage of the tool OLED display interface description: Push battery into charger and connect the plug with the outlet. Make sure the ambient temperature is between 10℃-40℃。The charging time is around 1hour. Please see the illustration below. Tool illuminator: After clicking the start...
-
Page 7: Crimping Operation
3. Crimping operation... -
Page 8: Maintenance And Servicing
During crimping, please make sure the connector with cable in MAINTENANCE AND SERVICING the center of crimping head, otherwise it will damage the tool or failure to crimping. See the following illustration: Damaged equipment may cause serious personal injury. Do not use damaged equipment. -
Page 9: Limited 2 Year Warranty
TROUBLESHOOTING LIMITED 2 YEAR WARRANTY FAULT ANALYSIS SOLUTION We make every effort to assure our products meet high quality and durability standards, Dirt, contaminants, Clean hydraulic system etc in ram area of tool. and warrant to the original purchaser that this product is free from defects in materials and A.