Bank Mode; Setting Items Saved To And Loaded From Banks; How To Save And Load Settings To / From A Bank - Panasonic HG-S Series User Manual

BASIC OPERATION

4-2-4 Bank Mode

<Overview>
You can save / load the HIGH set value or LOW set value to/from a specified bank (1 to 3).
You can use the bank function to save settings for an object to be measured in a bank, and eas-
ily load the settings when needed.

4-2-4-1 Setting Items Saved to and Loaded from Banks

Setting item
All setting items
HIGH set value, LOW set value
HIGH set value, LOW set value, preset value
<Reference>
● Setting items saved to and loaded from banks can be changed in setting mode.
For the setting procedure, refer to "5-6 Bank Settings (
● Set values saved to and loaded from banks are saved in internal memory and retained even af-
ter the power is turned OFF.
● The usage count is about 1 million.

4-2-4-2 How to Save and Load Settings to / from a Bank

As shown below, there are two methods for saving and loading settings to / from a bank.
Method
Key operation
External input
4-20
SEN TRONIC
AG
Produkte, Support und Service
Save
• Only by key operation.
Load
• By either key operation or external input.
Factory default state
Default state
Description
Save to bank
Load from bank
Load from bank
Rugghölzli 2
CH - 5453 Busslingen
–
–
)".
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
Bank 1
Bank 2
Bank 3
mailbox@sentronic.com
www.sentronic.com