First Use Wizard; Before You Begin; Initiate Configuration Or Exit The First Use Wizard - LG Pro:Centric 43UT570H Setup Manual

First Use Wizard

Note: After it is turned ON, the TV begins an initialization process, and it may take several minutes
for the First Use Wizard to appear.
LG's First Use Wizard, comprising multiple configuration options, will appear on the screen each
time the TV is turned ON, until one of its configuration methods has been completed or the wizard
is exited. Use the Installer Remote to make selections and complete each step.
• Basic Settings: Initiates the Basic Settings Wizard, which enables you to select basic TV settings,
including the TV's language and location, and run Channel Tuning. It also allows you to configure
the TV's network settings, if desired. See "Basic Settings Wizard" on pages 18 to 20 for further
information.
• Solution Settings (default): Initiates the EZ-Manager Wizard. The primary purpose of the EZ-
Manager Wizard is to guide you through the process (automated or manual) of configuring the
essential Installer Menu items for Pro:Centric operation.
While the EZ-Manager Wizard is intended primarily for Pro:Centric-related configuration, the
wizard also offers Zoning and network configuration options and, in addition, enables you to
access the TV Manager / USB download options as part of the configuration process, if desired,
to perform USB configuration and/or update functions. See "EZ-Manager Wizard" on pages 21
to 30 for further information.
• IP Environment Settings: Enables you to access the IP Environment Menu to set up network
features of the TV, including Pro:Centric features. See "IP Environment Setup" on pages 61 to
65 for further information.
Caution: Do NOT unplug the TV power cord or remove the antenna cable or, if
applicable, the LAN cable during the configuration process, as doing so will interrupt
the current step and may corrupt the configuration data.

Before You Begin

• If you plan to create a customized Master TV Setup using the procedure described on pages 46
to 48, be sure to exit the LG First Use Wizard in order to avoid setup conflicts or setting modes
that may cause unintended behavior or restrict the custom setup procedure. See also "Initiate
Configuration or Exit the First Use Wizard" below.
• If it has been completed or exited and therefore does not display, the First Use Wizard can be
reactivated; however, this requires that you restore the TV to a factory default condition. See
Reference section, "Restoring Factory Defaults on the TV(s)," for further information.

Initiate Configuration or Exit the First Use Wizard

The Welcome screen provides a brief introduction to the First Use Wizard.
Note: The Welcome screen is allotted a time frame of 10 seconds, after which the Solution
Settings / EZ-Manager Wizard proceeds without user interaction. If a Pro:Centric server is
configured on the system/network and if no location-specific settings are required in the TV,
for example, TV Zone, Label, and/or Room Number settings, from this point, the EZ-Manager
Wizard can proceed through each of the configuration steps with no further user interaction.
16
(Continued on next page)
206-4341