Playback; Program; Repeat - Matsui MHFCD10E Instruction Manual

Playback

1. Set the FUNCTION selector to CD mode.
GB
2. Open the CD door and place a CD with the label side facing up in the CD
compartment.
3. Close the CD door.
4. Focus search is performed when the disc is inside. The total number of tracks will
appear on the display.
5. Press the
6. Adjust the VOLUME control to the desired level.
7. Press the
8. Press the

Program

• Up to 20 tracks can be programmed to play in any order.
• Be sure to press the
1. Press the PROGRAM button, the display will show 01 and flash.
2. Select desired track by using the
3. Press the PROGRAM button again to confirm desired track into the program
memory.
4. Repeat steps 2 and 3 to enter additional tracks into the program memory.
5. When all the desired tracks have been programmed, press the
button to play the disc in the order that you have programmed
the tracks. The program indicator will flash.
6. Press the
program indicator will turn off.

Repeat

Press the REPEAT button before or during CD playback. You can set a single track or all
the tracks to play repeatedly. Each press switches the repeat mode as follows:
1. REPEAT 1
The repeat indicator will flash.
2. REPEAT ALL
The repeat indicator is on.
3. NORMAL PLAYBACK
8
button to start playing the CD disc.
button again when you want to stop playback temporarily.
button to stop playback.
button before use to ensure no prior program has been set.
button twice to terminate programmed play. The
or button.
REPEAT 1 REPEAT ALL
Program
Indicator
NORMAL
PLAYBACK