Unpacking the Chassis
SUMMARY STEPS
1. Using the Phillips #2 screwdriver, remove the fourteen M4 screws that connect the right support bracket
to the chassis.
2. Using the 3/8-in. socket wrench, remove the 4 hex cap bolts that connect the right support bracket to the
pallet.
3. Set the support bracket aside carefully.
4. Repeat Step 1 through Step 3 for the left support bracket.
DETAILED STEPS
Step 1
Using the Phillips #2 screwdriver, remove the fourteen M4 screws that connect the right support bracket to the chassis.
Removing the Chassis from the Pallet
Unpacking the Chassis
5