Xerox Scan to PC Desktop v9.0 Network Installation Manual page 9

3. If applicable, select a language for the administrative installation (not necessary if setup language
was specified in the command line).
4.
During installation, specify a target network location for the
created.
Share this location (Software Distribution Point).
5.
Software components and their installer locations for the Special Edition:
Software component
1 PaperPort 11 SE
2 OmniPage SE 4
3 Image Retriever 7 SE
4 PaperPort Image Printer
Software components and their installer locations for the Professional Edition:
Software component
1 PaperPort Professional 11
2 OmniPage Professional 15
3
Image Retriever 7 Pro
4 PaperPort Image Printer
5 PDF Converter Professional 4
Note: PDF Converter Professional 4 and PaperPort Image Printer have 32- and 64-bit versions. They are located
at the folders <System32 or System64>, respectively. Use the ones appropriate for your target operating system.
Installer location on the CD-ROM
PP11SE\PaperPort
OPSE4\OmniPage
IR70SE
PP11SE\PaperPort\PrinterDriver SETUP /A
Installer location on the CD-ROM
PP11PRO\PaperPort
OP15PRO\OmniPage
IR70PRO
PP11PRO\PaperPort\PrinterDriver SETUP /A
PDFCONV4PRO\<os>\PDFConverterPro
9 of 16
administrative image to be
Command
SETUP /A
SETUP /A
SETUP /A
Command
SETUP /A
SETUP /A
SETUP /A
SETUP /A