Passos seguintes
1. Volte a colocar
o painel do ecrã
2. Volte a colocar a
moldura do ecrã
3. Volte a colocar o
conjunto do ecrã
4. Volte a colocar a
WLAN
5. Volte a colocar a
bateria
6. Volte a colocar a
tampa da base
7. Volte a colocar a
placa de memória SD
8. Siga o procedimento indicado em
Porta do transformador de corrente
Removing the power adapter port
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory card
3. Remove the
base cover
4. Remove the
battery
5. Remove the
WLAN
Steps
1. Disconnect and route the power adapter cable from the system board [1, 2].
2. Remove the single (M2x3) screw that secures the power adapter port to the palmrest and keyboard assembly [3].
3. Lift the power adapter port, along with its cable, off the palmrest and keyboard assembly [4].
Após efetuar qualquer procedimento no interior do computador
before working inside your computer
Retirar e instalar componentes
95