Husqvarna H300 Product User Manual page 25

Mesh visor/visor holder
V 300
The following standards have been applied: EN 1731:2006.
Notified body: 0403, Finnish Institute of Occupational Health, Work Environment Developement, Protection and Product
Safety, Topeliuksenkatu 41a A, FI-00250 Helsinki, Finland.
The product is labelled with information regarding performance and areas of application.
CAUTION! If visors and holders do not have the same terms for use, the lower performance level should
apply for the protective equipment in its entirety.
Definition of label
V 300
EN 1731:2006
S
CE
24 – English
TECHNICAL DATA
Model
The product complies with the specified standard (the standard
specifies suitable areas of application)
Increased mechanical strength. (Can withstand a 22 mm steel ball
hitting the visor with a speed of 5,1 m/s.)
This product is in accordance with applicable EC directives.