Epson SC-F500 Series User Manual page 99

SC-F500 Series User's Guide
Settings item
Resolution
Color Mode (Com-
mon)
HP-GL/2 Unique Settings
(Print settings unique to HP-GL/2 or HP RTL modes.)
Rotate
Origin Setup
Using the Menu
Settings value
*
Standard
300dpi
600dpi
1200dpi
EPSON Standard (sRGB)
*
Business Graphics
GIS
Line Drawing
Off (No Color
Management)
*
0˚
90˚
180˚
270˚
*
Left Edge
Center
Explanation
This setting is enabled when the resolution is not specified in the sent
print data. Standard prints at the resolution corresponding to the
Paper Type setting for the paper selected in Paper Source and the
Print Quality setting.
Optimize the sRGB space and correct the color.
Perform color correction to sharpen your images based on the sRGB
space.
Perform color correction suitable for when printing GIS (Geographic
Information System) topographical maps or similar.
Perform color correction suitable for CAD drawings and other line
drawings.
Do not perform color correction.
You can rotate the coordinates of the drawn data counterclockwise in
units of 90˚ before printing. Note that objects drawn by RTL are not
rotated. When both this setting and the RO command specify
rotation, rotation is performed using the combined amount of both
values. Note that rotation by the RO command is for objects only (the
arrow section in the following illustration), and rotation is not
performed for the drawn area (the square section in the following
illustration). As a result, objects in a section that protrude from the
drawn area are not printed.
Set the data coordinate origin.
99