Download
Share
Print this page
NeedforSeat MAXNOMIC OFFICE-COMFORT Chair Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. NeedforSeat Manuals
  4. Indoor Furnishing
  5. MAXNOMIC OFFICE-COMFORT Chair
  6. Assembly instructions manual

NeedforSeat MAXNOMIC OFFICE-COMFORT Chair Assembly Instructions Manual

Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
ASSEMBLY INSTRUCTIONS
®
CHAIRS „OFFICE-COMFORT"

Advertisement

loading

Related Manuals for NeedforSeat MAXNOMIC OFFICE-COMFORT Chair

Summary of Contents for NeedforSeat MAXNOMIC OFFICE-COMFORT Chair

  • Page 1 ASSEMBLY INSTRUCTIONS ® CHAIRS „OFFICE-COMFORT“...

  • Page 2: Dear Customer

    For smooth assembly of your chair, we ask that you follow the step-by-step instructions, especially the important safety information. ® Your NEEDforSEAT Team Before we begin: The chair shown in the photos might be a different model, however, the assembly is the same for all of the chairs in this category.
  • Page 3 Unpack all of the contents from the package; if you have To reduce the shipping package dimensions, only one a delicate floor, protect it with a blanket or some other armrest is pre-assembled. The second one will be covering before laying out the contents. assembled during this process.
  • Page 4 Place the two washers as shown and place the armrest First place the outside two screws with the other near the seat. washers and tighten them smoothly by hand only. Do not force. Insert the third screw and tighten by hand. Once in The width of the armrest may be adjusted later in place, use the tool to tighten all three screws.
  • Page 5 The adjusted backrest can now be tightened Place the Philips head screw in the plastic cover. beginning with the two screws on each side of the top, then the bottom screws. Position the cover with the screw aiming at the hole. Do not tighten the screw too firmly –...
  • Page 6 Place the tilt mechanism as straight as possible and Place the plastic handles over the shafts of the tilt tighten the screws with the universal tool. mechanism as shown. The flat portions should point to the front of the seat. Once both are in the right direction, push the handles in Place the telescoping cover as shown over the gas lift tightly.
  • Page 7 Now turn the chair over into the upright position, holding You may place the head pillow over the backrest using the base and upper portions together (the parts become the elastic strip. tightly assembled once weight is placed on the chair). Bring the backrest into the upright position by pulling FINISHED! Enjoy your new MAXNOMIC®...

  • Page 8: Important Safety Information

    All rights reserved Copying of materials, even in part, only by written agreement. NEEDforSEAT & MAXNOMIC are registrated trademarks in Germany and other countries. ® ® © NEEDforSEAT • Marco Wörenkämper • Wiesenstraße 13 B • 34246 Vellmar • Germany • www.needforseat.com...