ASROCK H410M-HDV Manual page 23

Chassis/Water Pump Fan
Connector
(4-pin CHA_FAN1/WP)
(see p.1, 2, No. 2)
CPU Fan Connector
(4-pin CPU_FAN1)
(see p.1, 2, No. 3)
ATX Power Connector
(24-pin ATXPWR1)
(see p.1, 2, No. 5)
ATX 12V Power
Connector
(8-pin ATX12V1)
(see p.1, 2, No. 1)
FAN_SPEED
FAN_VOLTAGE_CONTROL
FAN_SPEED_CONTROL
GND
+12V
CPU_FAN_SPEED
GND
FAN_SPEED_CONTROL
1 2 3 4
12 24
1 13
8 5
4
1
This motherboard provides one
4-Pin water cooling chassis fan
connector. If you plan to connect
a 3-Pin chassis water cooler fan,
please connect it to Pin 1-3.
This motherboard
provides a 4-Pin CPU fan
(Quiet Fan) connector.
If you plan to connect a
3-Pin CPU fan, please
connect it to Pin 1-3.
This motherboard pro-
vides a 24-pin ATX power
connector. To use a 20-pin
ATX power supply, please
plug it along Pin 1 and Pin
13.
This motherboard
provides a 8-pin ATX 12V
power connector. To use a
4-pin ATX power supply,
please plug it along Pin 1
and Pin 5.
*Warning: Please make
sure that the power cable
connected is for the CPU
and not the graphics
card. Do not plug the
PCIe power cable to this
connector.
H410M-HDV
H410M-HVS
21