registering Magic remote
Control
It is necessary to 'pair' (register) the magic remote control
to your TV before it will work.
How to register the Magic remote Control
BACK
HOME
1 To register automatically, turn the
TV on and press the Wheel(OK)
button. When registration is
completed, the completion
message appears on the screen.
P
2 If registration fails, turn the TV
off and back on, then press the
Wheel(OK) button to complete
registration.
MY APPS
How to re-register the Magic remote Control
1 Press and hold the BACK
BACK
SMArT
buttons together for 5
seconds to reset, then register it
SMArT
by following "How to register the
Magic Remote Control" above.
2 To re-register the Magic Remote
Control, press and hold the
BACK
button for 5 seconds
toward the TV. When registration
is completed, the completion
message appears on the screen.
How to use Magic remote
Control
1 If the pointer disappears, move
the Magic Remote Control
slightly to left or right. Then, it
will automatically appear on the
screen.
» If the pointer has not been used
for a certain period of time, it will
disappear.
2 You can move the pointer by
aiming the Pointer Receiver of the
Magic Remote Control at your TV
then move it left, right, up or down.
» If the pointer does not work
properly, leave the Magic
Remote Control for 10 seconds
then use it again.
MAGIC REMOTE CONTROL FUNCTIONS
11
-1 Brief Info Title Test...
If you press Wheel(OK) on the Magic Remote
Control, the following screen appears.
1
Shows information about the current programme
and screen.
You can select More
2
and
Precautions to Take when using
the Magic remote Control
y Use the Magic Remote Control within the maximum
communication distance (10 m). Using the Magic
Remote Control beyond this distance, or with an
object obstructing it, may cause a communication
failure.
y A communication failure may occur due to nearby
devices. Electrical devices such as a microwave
oven or wireless LAN product may cause
interference, as these use the same bandwidth (2.4
GHz) as the Magic Remote Control.
y The Magic Remote Control may be damaged
or may malfunction if it is dropped or receives a
heavy impact.
y Take care not to bump into nearby furniture or
other people when using the Magic Remote
Control.
y Manufacturer and installer cannot provide service
related to human safety as the applicable wireless
device has possibility of electric wave interference.
y It is recommended that an Access Point (AP) be
located more than 1 m away from the TV. If the
AP is installed closer than 1 m, the Magic Remote
Control may not perform as expected due to
frequency interference.
31
Info.
More
Menu.