Description; Introduction; Simatic Documentation - Siemens TM Timer DIDQ Commissioning Manual

Description

2.1

Introduction

The following provides an overview of the technical characteristics of the TM Timer DIDQ
10x24V and 16x24V technology modules. It also provides information on systems integration
with SIMOTION and an overview of typical machinery applications.
Detailed information on the technology modules, including installation, can be found in the
SIMATIC documentation. An overview of the available manuals can be found in Chapter
SIMATIC documentation (Page 15).
2.2

SIMATIC documentation

Overview of SIMATIC documentation for Timer DIDQ technology modules
The following table lists the SIMATIC documentation that you require when using the Timer
DIDQ technology modules.
Note
This manual is intended solely as a supplement for the configuration of TM Timer DIDQ
technology modules under SIMOTION SCOUT or SIMOTION SCOUT TIA. The SIMATIC
documentation listed in the following table is therefore required when using the technology
modules.
Subject
Description of the system ● ET 200SP Distributed I/O System
Technology Modules TM Timer DIDQ for SIMOTION SCOUT and SIMOTION SCOUT TIA
Commissioning Manual, 01/2015
Documentation
System Manual
● ET 200MP Distributed I/O System
System Manual
S7-1500 Automation System System Manual
Interface Module Manual
● Manual ET 200SP Technology Module TM Timer
DIDQ 10x24V
● Manual ET 200MP/S7-1500 Technology Module
TM Timer DIDQ 16x24V
Most important content
● Use planning
● Mounting
● Connecting
● Commissioning
● Connecting
● Alarms, diagnostic, error and
system alarms
● Technical specifications
● Dimension drawing
● Properties
● Connecting
● Configuring
● Technical specifications
2
15