Xerox Document WorkCentre 450c User Manual page 246

Message
Memory is full.
Poll was canceled.
Memory is full. Will
retry: MM-DD,
HH:MM am/pm .
Memory is full. Will
try dialing later.
Menu not available
during fax job setup.
Meaning
There isn't enough
memory to retrieve the
document from the other
fax machine.
There isn't enough
WorkCentre memory. Your
fax will be sent at the
specified time.
There isn't enough
WorkCentre memory and
the phone line is not
available. When the
WorkCentre's memory
increases, it will continue
scanning the document and
then redial the number
when the phone line is free.
You tried to use other
menus before pressing the
key to send your fax.
START
Action
Increase memory by
deleting or printing the
documents stored to
memory, and then try
again.
Increase memory by
deleting or printing the
documents stored to
memory. If you do not want
to wait until the WorkCentre
sends the fax, press
to remove the
CLEAR
document, and try faxing it
again.
Increase memory by
deleting or printing the
documents stored to
memory. Make sure your
telephone line is
connected.
Press to send your
START
fax, and then perform
another task.
246
EXIT/