Advertisement
Straightedge
Against Table
Table Clamped To Rails
Step 11.
Attach the rails to the table with the (8)
⁄
"-16 x 1
⁄
" hex bolts, (16)
3
3
8
4
⁄
"-16 nuts. The assembly order should be hex
3
8
bolt, flat washer, rail, extension table, flat washer,
and hex nut. Note—some assemblies will require
⁄
" holes drilled through the table to match fence
3
8
rail holes for mounting.
⁄
" washers and (8)
3
8
Step 12.
Use the straightedge to verify that the
extension table is flush with the saw table and is
even along its entire length. Minor adjustments
may be made by adjusting the rail-to-table hex
bolts or by rotating the feet. Note—lock the
hex nuts to keep the feet in place after adjustments
are final.
Step 13.
Mount the fence to the rails, and slide
the fence back and forth to ensure proper opera-
tion.
If you have any questions or need help
troubleshooting, please contact Woodstock
International Service and Support at 1-360-
734-3482 or send e-mail to:
tech-support@shopfox.biz.
⁄
"-12
1
2
Advertisement
